PULSE X3 Instructions
PULSE X3 Laser Rangefinder
High-performance laser rangefinder with ultra-clear optics and fast target acquisition.
Introduction
Thank you for choosing the PULSE X3. This fourth-generation laser rangefinder delivers brighter, sharper viewing and faster target acquisition—performing from dawn to dusk, in rain or fog.
The X3 is purpose-built to lock distances quickly and accurately, including long targets as far as 800 yards (yes, this is over-engineered, but we wanted to be sure you’ll be dialed-in from approach distance!) Expect reliable performance on every shot with quick-response support and a one-year warranty.
Need help? Email support@scoreband.net.
Product Diagram
- Power/Scan (acquire target) button
- Mode button (M)
- Eyepiece (dial to focus)
- Objective lens & laser aperture
- Vibration mechanism (internal)
- Grip & strap eyelet
- Battery compartment
Quick Start
- Insert Battery: Open the battery cap; insert a CR2 3V battery with the negative end first.
- Power On: Press the green Power/Scan button.
- Aim: Align the crosshair/reticle over the target.
- Acquire: Press and hold to scan distance; release to hold the reading.
- PinSeek: In M2 or M3, you’ll feel two short pulses when the flag is locked.
- Units: Hold the Mode button for ~1 second to toggle Yards ⇄ Meters.
Targeting Modes
Measure direct distance to the target. Press and hold Power/Scan to continuously update the reading while panning.
PinSeek isolates the nearest object (flag) from background. Two short pulses confirm lock-on.
Shows direct distance plus slope-adjusted distance to the flag when locked.
Features
- Fast, easy operation with ultra-clear optics
- 90%+ light transmittance for a brighter view
- Easy dial-to-focus eyepiece
- Water and dust resistant
- Compact, lightweight ergonomic design
- Vibration feedback when flag is locked
- 3 Modes: Scan, PinSeek, PinSeek + Slope
- Auto power-off after ~30 seconds
Specifications
| Magnification | 6× |
|---|---|
| Objective Lens | 22 mm |
| Field of View | 7° |
| Display / Lens | LCD / Multi-Coated |
| Wavelength / Pulse Width | 905 nm / 15–20 ns |
| Range | 5–1,200 yards (typical) |
| Accuracy | ±1 yard |
| Battery | CR2 3V |
| Auto Power-Off | ~30 seconds |
| Weight | ~171 g |
Care & Maintenance
- Use the included microfiber cloth to clean lenses.
- Apply lens cleaner to cloth (not directly to lens).
- Water-resistant, not submersible; dry after heavy rain.
- Store in case; avoid extreme temperatures.
Safety
- Do NOT aim at the sun or eyes.
- Do not open or disassemble the unit.
- Keep out of reach of children.
- Avoid sand/mud ingress; wipe dry immediately.
- Do not point toward vehicles, people, or animals.
Troubleshooting
If the display malfunctions
- Remove and reinsert the battery.
- Confirm polarity (+/–) is correct.
- Ensure the battery has charge.
- Press the power button firmly.
If target cannot be obtained
- Verify mode selection and that device is powered.
- Check if anything is blocking either lens.
- Avoid measuring through glass; move to clear line-of-sight.
Warranty & Support
One-Year Limited Warranty covers defects in materials and workmanship under normal use. Misuse or modifications are excluded.
Contact support: support@scoreband.net
Model: PULSE X3 • Quick Start Web Guide